How to Make Bamboo Furniture: Part One

I have a real soft spot for bamboo furniture, and I've always wanted the parlor to have a few pieces. As it turns out, miniature bamboo furniture is incredibly difficult to find! I've been searching for over a decade, and only found a couple pieces, none of which were quite right for my house. In fact, the only piece of bamboo furniture I have is this chair that Mom made. It was one of the first pieces of furniture Mom made, and it's become quite rickety as the glue is letting go. I finally had to pack it away for safekeeping until it can be fixed or remade.

 This illustration of a bamboo "overdoor" caught my eye in a library book a while ago. I am completely addicted to dollhouse porcelain, so anything that lets me cram in a few more plates/vases/figurines is a good thing in my book! I had to make it.

I reworked the design to fit over the parlor door. I eliminated all the curved pieces, which would have made the project more difficult. I was also completely out of narrow dowels, so I used toothpicks to make the bamboo. Using toothpicks meant I had to break the long bottom piece into three sections, which I think made the whole thing a bit more fragile.

I used my chopper to cut the toothpick pieces to size. If anyone wants exact measurements, I can add them to the next post. The bamboo rings were made with DMC floss, covered in tacky glue and then wrapped twice around the toothpicks. I added the rings randomly, though I did try to keep the spacing fairly consistent.

My gluing jig was helpful keeping the bottom and vertical bars square.

I used my drawing to add the top and middle bars.

This is the assembled back portion of the overdoor. It still needs a shelf, decorative panel, and paint job. I had to pause here for a while, since this was as far as I had planned. I took a moment to check the fit over the parlor door.

 

Not bad, but it still has a ways to go!

The shelf was made from more toothpick and thread "bamboo", and a scrap of thin wood from a sandalwood fan. I tucked a piece of cardstock where the painted panel will eventually go. I'm thinking about adding panels behind the four bottom squares as well, but will wait until the I've painted the bamboo to decide.

Here's a better view of the shelf.

I'm also toying with the idea of adding a pair of little shelves for teacups or small vases on either side of the main shelf, approximately where you see them in the picture above. Next up, I'll be faux-finishing the bamboo, and painting that back panel.

A Gift For Mom

Every year, I try to make one or two miniature gifts for Mom. This one is a project I've had in mind for several years. Mom loves dummy boards in both real life and miniature. We also have a really sweet English Cocker Spaniel who loves to sleep in front of a fire. Sometimes she curls up so close to the fireplace that she's nearly lying in the coals! For a few months, I toyed with the idea of commissioning a dummy board from Pastmastery, but just as I was ready to commit, they announced they would no longer be making miniature dummy boards.

The other day, I finally decided to try painting one myself. Since I couldn't get the dog to remain in the correct position for long (she's getting old, and kept putting her head down to sleep) I had to do the initial sketch from a photograph. I painted her with acrylic paints on thin birch plywood.

There are still a few touch ups I need to do, but most of the painting is done. I added a toothpick to the photo above for scale.

Here's the back, showing the triangular support piece. I still need to sign and date it, something I always forget to do. It doesn't matter too much when things we make are just staying in our own collections, but we have to double check that everything is signed before each show!

Painted Table

Lately I've been really enjoying working on furniture. I've posted about the sofa and chair I reupholstered, and the knobs I changed on Pheobe's dresser. This table was just a fun project.

 This kit was a Christmas gift which has been sitting in my kit drawer for the last few months. It was much easier to paint the base colors while the table was unassembled. The apron got a few coats of blue , and the table top and legs were painted off white.

 I assembled the table before I'd figured out what I wanted to do on the top. Measuring those wedges and filling them in with the blue would have been easier while the table was still in pieces, but I managed! The decorative painting is really fun to do- it's like doodling with paint. I actually used a lot of gold on this table, but it didn't photograph well. Those brownish spots along the table edge, for exmple, are really gold!

A Before and After

 I spotted this chair at my local dollhouse shop the other day. It was a bit chunky, but I liked the front legs, and the price was low, so I bought it.

This is the way it looks now:

You might have noticed I did a little surgery on the chair. The braces on the bottom were too chunky, so I broke them off and sanded that area smooth. I also used an X-acto knife to hack off portions of the back legs and bevel the slatted backs.

 It might not look it from these photos, but the back legs of the finished chair have only about half the wood they started with!

Carving down the chunky bits of commerical furniture is an easy way to make these pieces look a little less mass produced!